Milwaukee Bit - Guide Plate 2-1/2 in. for Carbide Core Bits




mwlogo.gif (5341 bytes)



Milwaukee Guide Plate

Use with Core Bit 48-20-5140 and Center Pin 48-20-5199 for starting a 1-1/4 inch hole. After drilling to a depth of approximately 1/4 inch, stop hammer, remove guide plate and center pin, place core bit back into the grooved area and resume drilling to required depth of hole.


  • 2-1/2 in. diameter
  • Plastic
  • Used with core bit 48-20-5140
  • For bit stability - reduces bit walk